When it comes to using plywood for furniture, interiors, or even construction, one of the most important but often overlooked steps is the finishing. A good finish doesn’t just make the wood look beautiful — it protects it from damage, moisture, and daily wear and tear.
Whether you’re working with shuttering plywood, block board, or a flush door, the right polish or paint can extend its life and enhance its strength. In this guide, we’ll walk you through the basics of wood finishing and how you can get the most out of your wood — especially when it’s from Altwood, your trusted name in best quality plywood.
Before we talk about polish or paint, let’s talk about the base: the plywood itself. A smooth and strong surface comes from good material. At Altwood, we offer a wide range of quality plywood, including alternate plywood, pinewood, and red core options — all designed to take finish well and last longer.
Whether you’re in Asansol, looking for Jharkhand plywood solutions, or checking Ranchi plywood price, Altwood ensures consistent quality across regions. We are one of the most trusted plywood manufacturers and plywood suppliers in the Odisha plywood and North East wood markets too.
Sanding is a must before applying any kind of paint or polish. It helps smooth out the surface, removes rough edges, and opens up the wood grains so the finish can be absorbed better.
If you’re working with plywood sheets, sand lightly with 180-220 grit sandpaper. For shuttering plywood that’s been reused or exposed to cement, make sure to remove any hardened dust or grime before sanding.
The choice between polish and paint depends on the final look you’re going for.
At Altwood, our plywood is manufactured to take both polish and paint evenly, so you don’t have to worry about blotches or uneven patches.
If you’re polishing, go for a wood sealer first. It fills in the pores and creates a smoother surface. Once dry, apply 2–3 coats of polish using a brush or spray — allowing each coat to dry before applying the next.
You can even use wax polish for that soft, satin glow on your flush doors or built-in shelves made with block board.
When painting plywood sheets, always use a primer. It helps the paint stick and brings out a brighter, more even tone. Go for acrylic or oil-based paints depending on whether the wood is for indoor or outdoor use.
For customers looking for budget-friendly options, Altwood offers premium quality at competitive plywood prices — without compromising on finish compatibility.
Once polished or painted, add a protective topcoat. This could be a clear varnish, PU (polyurethane), or melamine layer. It helps seal in the finish and adds resistance to scratches, spills, and moisture — which is especially important for shuttering plywood or kitchen cabinets.
Altwood’s best quality plywood is already treated for moisture and termite resistance, but a good finish just adds another layer of protection and peace of mind.
Even the best finish needs some care. Wipe surfaces with a soft, dry cloth. Avoid using too much water or harsh chemicals. Reapply polish or touch-up paint once a year to keep everything looking fresh and new.
When you choose Altwood, you’re choosing durability — but your finish plays a big part in keeping that strength and shine alive.
Finishing isn’t just about looks — it’s about protecting your investment. Whether you’re a contractor working with shuttering plywood in Odisha, a homeowner installing a new flush door in Asansol, or a designer sourcing alternate plywood from North East wood markets — your finish matters.
With Altwood, you’re starting strong with quality plywood — and a great finish takes it even further. So sand well, pick the right polish or paint, and protect it with care. You’ll be amazed at how much longer your wood lasts — and how much better it looks.